FINGER SAVER HAND SAFETY TOOL
The FingerSaver is intended to offer support of the tool equivalent to that of hands and fingers; its design carefully considered and tested on typical applications and uses where large spanners and flogging spanners are used on nuts and bolts. As all applications may vary, a risk assessment of its appropriate safe use should always be assessed by the user, prior to each and every operation.
The FingerSaver may be considered for use in other applications and/or on other tools, where the operator wishes to move hands and fingers further away from the risk of impact or pinching; again the operator MUST independently assess whether its use is appropriate and ultimately safe.
The materials of construction of the FingerSaver are designed to be light in weight and quick and easy to support and release the tool supported; if dropped the FingerSaver is unlikely to injure the user easily, damage equipment or directly generate sparks in hazardous environments. The materials have been selected and developed to be resistant to ozone and atmospheric ageing and are also resistant to a large number of contaminants, in particular general lubricants that may contaminate its surface through contact with soiled work gloves and or soiled plant areas. If any part of the FingerSaver is subjected to any known aggressive contaminant and/or shows any sign of damage or deterioration through product contamination we recommend the FingerSaver is safely disposed of. The main plastic body is designed not to splinter upon impact and will not deteriorate easily; the operator/user should however inspect the FingerSaver as they should any other tool and only use if not obviously damaged. If any part of the FingerSaver is significantly damaged through impact or pinching it should again be disposed of safely.